Configure your Machine+
Powerful cut up to 8 inch in height+
The massive cutting height of 204 mm and the tilting angle of 0 to 46° provides greater flexibility for complex tasks. With the ProLock-System, the main as well as the scoring saw blades can be replaced quickly and easily. The rotational speed is easily changed via belt/pulley through an opening in the cast iron trunnion behind the main saw blade. With the optional variable speed control the RPM’s can be adjusted to a wide variety of different man-made materials. You simply enter the desired rotational speed of the saw blade without having to turn off the machine.
Length compensation made easy+
The calculation of the length compensation for angle cuts comes as a standard on even the most basic T65. The optional “RadioCompens” angle cutting system takes things one step further and reduces set-up times by more than 80%. You simply set the radio controlled miter cross-cut table to the desired cutting angle. The radio-controlled electronics take care of the rest. You always get the correctly calculated measurements on both displays of the digital length stops. You can still demount the cross-cut fence as well as the cross-cut table from the machine without any problem since the communication is radio-controlled.
Precise rip fence+
The rip fence of the T65 can easily be manually moved and thanks to the standard fine adjustment can be set very precisely. The precision rip fence’s wear-free grooved ball-bearing guide system further ensures maximum precision and allows the fence to glide over the table smoothly and without support. If large panels have to be cut, where the machine table must be cleared, the rip fence can be removed from the carriage in no time at all. With the optional hand-wheel, the cutting dimension can be indicated from the operating position over the full cutting width.
Control panel at eye level+
Get cutting edge performance for your entry level class saw and experience the unique user guidance of the MARTIN touchscreen controller at eye level. The positioning of the controller at eye level offers major advantages. With the 5.7“ touchscreen controller the operator is guided through complex work processes easily, quickly and accurately. All relevant information is visible at a glance.
VacuSlide workpiece clamping system+
VacuSlide is an efficient and intelligent clamping system for panel material made of wood, plastic or non-ferrous metals. It offers excellent performance especially if thin and/or delicate materials have to be clamped or bevel as well as mitre cuts have to be made. Workpieces up to 110 mm wide can be securely clamped. Preselection is not necessary. VacuSlide is activated or deactivated via radio remote control. Delivery includes: vacuum generator, remote control, reverse flow filter as well as low pressure warning device. Cannot be used in combination with the motorised sliding table or when the rip fence is set via hand wheel.