Shaping

Spindle moulder

T29

The T29’s thoroughly user-friendly, state-of-the-art control system allows the many mechanical delights of this machine to be used in an exceptionally effective and economical way. The main role of the groundbreaking control system is to support the user in all of his or her tasks. Where yesterday, users still had to carry out all of the time-consuming measurements and settings for the tools themselves, today they are supported by intuitive electronics. With up to seven electronically displayed and controlled axes, the T29 makes a considerable contribution to increasing efficiency in the workshop. Setting up the machine is no longer a question of trial and error – the very first workpiece fits perfectly in place!

Technology for today and tomorrow.

Setting up a spindle moulder, and particularly a tilting arbor spindle moulder, can be a major challenge. But that’s not the case with the T29 Flex tilting arbor spindle moulder with its innovative, groundbreaking control system which lets you work highly efficiently thanks to its intelligent networking options.
For example, the new, innovative ConnectControl system offers you the possibility of centrally managing your tool data from the Production Planning department. This means that not just one machine, but all machines with access to ConnectControl technology, are always provided with the latest data. When carrying out complex profile settings with a tilted spindle, it is not unusual for set-up times to be reduced by
up to 80%*. Even profiles as basic as a rebate can be set up to 20%*faster.

Since over 100 years
Made in Germany.

Cutter arbor clamping system HSK

Opt for the pneumatically operating HSK system. This system is ideal for any user who changes the complete tool/arbor units very often as it noticeably reduces set-up times. You can also use suitable CNC machining centre tools directly on the spindle moulder without any problem, thereby relieving this expensive machine from capacity-consuming traversing moulding tasks.

Small distances for great results.

On the T29, the electrically adjustable ring inserts, invented by MARTIN, are the perfect solution for closing the gap between the tool and the table in the best way possible. They are fully integrated into the control system and facilitate the set-up process enormously. By simply specifying a value or moving them manually, you can open or close the eccentric rings, and thus the gap, continuously. So at the start of the set-up process, you don’t need to know which fixed ring you need to insert into the table – you can simply adjust the gap quickly and easily at a later stage. It could hardly get any easier.

Fence jaws

The fence opening should always be closed in the firmly way so that the workpiece can be properly guided as it moves along the fence. This can be achieved with the tried and tested integral fence. The bars of the jaws, which are made of hard-coated aluminium, can be easily folded into position and released again, and the height position can also be varied.
The bar cassettes can be easily removed to allow working with a pre-set board.

May we introduce:

The new digital control panel

Cloud-based data storage

Cloud-supported work provides the data base for controlling the machine and also for many advanced features – which are available anywhere and any time. For effective digital and mobile work.

Anywhere, any time

An Apple iPad with a large screen and a WLAN-controlled connection serves as an adaptive control unit. The mobile device makes it possible to control the machine from any location.

Integrated touchdisplay

The permanently integrated, touch-sensitive console serves as the operating unit and can control all the machine’s functions.

An abundance of tools

Only with the ConnectApp can the full potential of Cloud-supported work processes be realised. In addition to the machine controls, it also opens up a whole range of administrative functions and wizards to support you.

Digital

user interface

for networked

working.

Discover Connect Control

Your material:

our strength.

Solid wood

What connects us with our customers: the passion for the precious material wood.

Anyone who works with wood must love it. The variety and the warmth it gives create enthusiasm for the most pristine of all materials. The wide range of possible applications offers room for creativity to unfold. Our machines are built for these passionate thinking and working people.

Plastics

When plastic is your business!

The almost unlimited technical properties make plastics a fascinating material for a wide range of applications in trade and industry. MARTIN planers are the tools of choice when it comes to manufacturing these products. With our decades of experience in the machining of plastics, we always offer the perfect solution, even for very special machining operations.

Light metal

Accurate results even with light metals.

Planing light metals and alloys with a weight content of less than 80 % magnesium is a demanding task for any sliding table saw. It is no coincidence that well-known aluminium processors rely on MARTIN. The robust construction, the powerful motors and the extensive accessories make the MARTIN planers the ideal tool for all those who value precise cutting.

More Highlights

More convenience with the feed support.

The electromotive positioning of the feed support with its ingenious latching mechanism provides genuine workload relief. The height adjustment of the feed unit can be easily specified and approached by the control system, and can also be integrated into the programs. The depth of the feed can be easily adjusted thanks to the ball-bearing guide.
And if the feed is not currently required, simply pivot it away to one side without losing any of the settings you made previously.

Fence jaw clamping system AutoLock

Fence jaws need to be moved on a regular basis in order to optimise the fence opening to suit the tool.
But all too often, clamping is forgotten about afterwards and the jaws are damaged. The optional AutoLock fence jaw clamping system ensures secure clamping of standard and integral fence jaws in a simple and safe manner. The jaws are always clamped securely by spring force and the clamping is only released for setting with the easily accessible levers. Completely without any electrics or pneumatics.

A patented solution: Collision detection and collision avoidance

If, during the set-up process, a tool is accidentally moved onto a collision course, the machine, which is equipped with continuous rotational speed control, detects this and warns the operator. This ensures the highest degree of safety,even for inexperienced operators. The machine software prevents collisions between the machine components (not tools) in the border areas of the travel paths of the table rings and the spindle sleeves. This significantly helps the machine to retain its value.

Fence plates

missing content

Arbor quick-change systems

The DornFix standard quick-change system is the perfect solution for everyone wishing to adjust the arbor diameter time and again. On the other hand, the HSK quick-change system is the number one choice for power users who often change the arbor of the complete arbor/tool units.
The system works fully tool-free and is compatible with the CNC processing centres of leading manufacturers. So you can use suitable CNC machining centre tools directly on the spindle moulder without any problem, thereby relieving this expensive machine from capacity-consuming traversing moulding tasks.

Front view

T29

Top view

T29

Front view with table extension

T29

Top view with table extension

T29

Top view with heavy sliding table T2980

T29

Testimonials

Great resale value

„I am building high end custom furniture and for this I needed the right machines for precise and quick results. I chose the Weber wide belt sander because it gives me the best flexibility for solid wood, veneer and lacquer/sealer sanding. With the patented WEBER CBF system, I get almost no oscillation and the few marks left are removed by the patented Weber planetary brush head aggregate. The planetary head not only takes the marks away it also can sand deep into profiles and breaks the edges so that we do not need to sand by hand anymore.
I also purchased a tilting arbor MARTIN T27 Flex shaper, T45 thickness planer, T54 jointer and the T75 Prex dual-tilting sliding table saw. These machines are heavy duty and carry with them a great resale value…something that you do not see much anymore with industrial woodworking machinery.“

Isaac B. Hayun

Trieste Corp.

Long Island City, NY

T29

Don’t hesitate to contact us!

to top