Configure your Machine+
Customer Comments about T60+
Straw Fine Furniture & Kitchen Cabinets
“We love the MARTIN slider! It has changed the way and speed of our work. I never would have thought i could joint wide, thick hardwood on a table-saw better than my jointer but the MARTIN slider does! Breaking down sheet goods is about 2-3x faster now than our old method, and the results are excellent.” Jason Straw www.strawwoodwork.com
Walden & Co.
“This is the fifth machine purchased from MARTIN and its accuracy and easy of use makes our panel cutting very easy and accurate.”
Operation at glance+
The T60A nicely rounds out the MARTIN saw line. The operation of the machine is focused on the essentials, but still offers everything necessary for a premium entry-level class saw from MARTIN. Cutting height and angle are adjusted electrically via pushbutton with a digital readout for the cutting angle.
Manual rip fence+
On the T60A the rip fence is adjusted manually to a scale. Standard features include a precise fine adjustment and mounting rack for the fence when the fence is removed from the table. The fence’s sophisticated guide system with four grooved ball bearings ensures long-term reliability. The rip fence can be adjusted very precisely with the optional digital display that is mounted on the rip fence. Repeatable accuracy of 0.1 mm is further supported by the exclusive MARTIN standard fine adjustment. The positioning of the rip fence profile (vertical to horizontal) is performed manually and is adjusted via pushbutton on the readout.
The T60A’s main blade is powered by a 5000 rpm 5.5HP motor. The machine’s maximum blade diameter is 315 mm, protected by a riving knife mounted guard. Optionally, you can get the “cutting height” package that contains a stronger 7.5 HP motor with three rpm selections and an overhead blade guard. The maximum cutting height on the T60A is 87.5 mm; with the “cutting height” package, panels with a thickness of up to 130 mm can be cut. Saw blades are replaced in a matter of seconds with the standard “quick-change” system.
High-quality mechanical design+
A smoothly running saw blade, a smooth and precise guidance of the sliding table and a precision rip fence; all fundamental features that woodworkers see as the most important aspects of a high-quality sliding table saw. The T60A can offer you this and even more. Like all the important mechanical components of the MARTIN saw line, the T60A’s sliding table, cross-cut fence and rip fence provide maximum precision and long life.
VacuSlide workpiece clamping system+
VacuSlide is an efficient and intelligent clamping system for panel material made of wood, plastic or non-ferrous metals. It offers excellent performance especially if thin and/or delicate materials have to be clamped or bevel as well as mitre cuts have to be made. Workpieces up to 110 mm wide can be securely clamped. Preselection is not necessary. VacuSlide is activated or deactivated via radio remote control. Delivery includes: vacuum generator, remote control, reverse flow filter as well as low pressure warning device. Cannot be used in combination with the motorised sliding table or when the rip fence is set via hand wheel.